Wall Thermostat For Heat Pump/ Gas Furnace Control In Coleman Mach Air Conditioners and Heat Pumps. Digital Readout; 12 Volt DC; With High/ Low Fan Speed Control; With Auto/ On Mode Fan Control; Black Case; With Plug; 5-1/2 Inch Length x 3-3/4 Inch Width x 1-1/8 Inch Height
Coleman-Mach 12V Wall Thermostat Black 9420-382 / 9420A382
- Easy to read digital display
- Controls: High/Low Fan Speed, Auto/On Mode, Heat Pump/Heat Strip, Gas Furnace
- Dip switches for selecting connected equipment
- Easy push style wire terminals
- Built in wire length strip gauge
- Comes with back mounting plate and documentation
- Measures approximately 4" Tall X 2.5" Wide X 1" Deep
The thermostat screen has a black background with a white LCD display. A rotary knob (to switch between selections and temperature settings) with a push button feature to select desired setting.
A minimum of 20 gauge thermostat wire is recommended. Intended for use with a 12VDC power supply that does not exceed 2 amps.
Equipped with a self-resetting PTC fuse located in the thermostat. The fuse is designed to "open" if the circuit is mis-wired or if there is a short in the system. If the PTC fuse continues to "open", the fault must be located and corrected.
An internal temperature sensor on the thermostat can act as the room temperature sensor. Alternatively, a remote temperature sensor can be connected and mounted virtually anywhere. Remote sensors are available separately.
Specifications |
|
| Color | Textured Black |
|---|---|
| Bluetooth | No |
| Functions | Heat Pump, Heat Strip/Element, Gas Furnace |
| Interface Type | Digital |
| Zone Control | No |
| Suggested Replacement Model | None |
| Mfg Part # | 9420A382 |
